 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| POWER RELAY 2 POLES--8 A LOW PROFILE TYPE FTR-F1 R SERIES RoHS compliant n FEATURES l l l l l l l DPST/DPDT 8A Low profile power relay (height 16.5 mm) employing unique construction Higher isolation by employing reinforced insulation co struction Insulation distance: 8 mm (between coil and contact) Dielectric strength: 5 kV (between coil and contact) Surge strength: 10 kV (between coil and contact) Pin configuration compatible to VB/FBR620 UL, CSA, VDE, SEMKO, CQCrecognized Conforms to FIMKO, IMQ, DEMKO RoHS compliant since date code: 0434R Please see page 8 for more information n ORDERING INFORMATION - 5A Rating Type [Example] (a) (b) (c) (d) FTR-F1 (a) A (b) L (c) 005 (d) R (e) - (**) (f ) Series Name Contact Arrangement Coil Type Nominal Voltage FTR-F1 : FTR-F1 Series A C L 003 005 006 009 R RG : 2 form A (DPST-NO) : 2 form C (DPDT) : High sensitive type (400 mW) : 3 VDC (high sensitive type 'D' only) : 5 VDC 012: 12 VDC : 6 VDC 018: 18 VDC : 9 VDC 024: 24 VDC : 8A : Transparency cover 048: 48 VDC 060: 60 VDC 100: 100 VDC (e) (f) Contact Rating Custom Designation Actual Marking: F1AL005V Ordering Code: FTR-F1AL005V 1 FTR-F1 SERIES n PART NUMBERS Ordering Part Number FTR-F1AL003R(-RG) FTR-F1AL005R(-RG) FTR-F1AL006R(-RG) FTR-F1AL009R(-RG) FTR-F1AL012R(-RG) FTR-F1AL024R(-RG) FTR-F1AL048R(-RG) FTR-F1CL003R(-RG) FTR-F1CL005R(-RG) FTR-F1CL006R(-RG) FTR-F1CL009R(-RG) FTR-F1CL012R(-RG) FTR-F1CL024R(-RG) FTR-F1CL048R(-RG) C: 2 form C FTR-F1 L: 400 mW A: 2 form A Series Contact Coil Power Coil Roltage 3 5 6 9 12 24 48 3 5 6 9 12 24 48 R: 8A RG: Transparency coRer Contact Rating Special Designation n COIL DATA CHART 400mW type Coil Voltage 003 005 006 009 012 024 048 Nominal Voltage (VDC) 3 5 6 9 12 24 48 Max. Coil Voltage*1 6.0VDC 10.0 VDC 12.0 VDC 18.0 VDC 24.0 VDC 48.0 VDC 96.0 VDC Coil Resistance (10%) 22.5 62 90 202 360 1,440 5,760 Must Operate Voltage*2 2.25 VDC 3.75 VDC 4.5 VDC 6.75 VDC 9 VDC 18 VDC 36 VDC Must Release Voltage*2 0.3 VDC 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 2.4 VDC 4.8 VDC 400 Nominal Power (mW) Note: All values in the table are measured at 20C. *1: No contact current at 20C *2: Specified values are subject to pulse wave voltage 2 FTR-F1 SERIES n SPECIFICATIONS Item Contact Arrangement Material Configuration Resistance (initial) Rating (resistive) Maximum Carrying Current*1 Maximum Switching Rating Maximum Switching Voltage Maximum Switching Load*2 Coil Nominal Power (at 20C) Operate Power (at 20C) Operating Temperature Time Value Life Operate (without diode) Release (without diode) Mechanical Electrical Other Vibration Resistance Shock Resistance Weight AC load DC load Misoperation Endurance Misoperation Endurance Standard Type F1(A, C)L ( )R Transparent Cover F1(A, C)L ( )R-RG 2 form A (DPST-NO), 2 form C (DPDT) Movable: gold plate silver tin oxide; Stationary: Silver tin oxide Single Maximum 100 m at 1 A, 6 VDC 8A, 250VAC / 24VDC 8A 2,000 VA / 192W 400 VAC / 300VDC 10mA 5 VDC 400mW 225mW -40C to +75C (no frost) -40C to +70C (no frost) Maximum 15ms (at nominal voltage, no bounce) Maximum 5ms (at nominal voltage, no bounce) 2 x 107 ops minimum 5 x 104 ops min. 5 x 104 ops min. 10 to 55 Hz, at double amplitude of 1.65mm 10 to 55Hz, at double amplitude of 3.3mm 100m/s2 (111ms) 1,000m/s2 (61ms) Approximately 12g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n INSULATION Item Resistance (initial) Dielectric Strength open contacts coil and contacts adjacent contacts Surge Voltage (coil and contact) Clearance/Creepage Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group Isolation category / Reference voltage (VDE0110b) FTR-F1 Minimum 1,000 M 1,000 VAC (50/60 Hz) 1 min. 5,000 VAC (50/60 Hz) 1 min. 3,000 VAC (50/60 Hz) 1 min. 10,000 V 8 mm / 8 mm 250 V 3 IIIa C / 250 V 1.2 x 50s standard wave Note at 500 VDC 3 FTR-F1 SERIES n SAFETY STANDARDS Type UL CSA Compliance UL 508 E63614 C22.2 No. 14 LR 40304 0435, 0631, 0700, 0860 Contact rating Flammability: UL 94-V0 (plastics) 8A, 24VDC (resistive) 8A, 250 VAC (resistive) 1/6 HP, 125VAC 1/4 HP, 250VAC Pilot duty: C300, R300 8A, 250 VAC (cosO=1) 8 A 24VDC (0ms) VDE Complies with BSI, IMC, CQC, NEMKO, DEMKO, FIMKO n CHARACTERISTIC DATA 8A Rating Type 100 Coil temperature rise Nominal voltage muitiplying factor FTR-F1CL( )R 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 20 Operating range FTR-F1CL( )R 10 5 Maximum Switching Power AC Resistive Temperature rise (C) 8A 60 5A 40 0A 20 0A 8A Contact Current (A) 80 100 80 2 1 DC Resistive ltag te vo Opera coil f hot o e 0.5 age te volt Opera coil f cool o 0.2 0 0 0.2 Coil Power (W) Life Curve 0.4 0.6 0.8 1 1.2 40 60 Ambient temperature (C) 10 20 Contact Voltage (V) 50 100 200 500 1000 100 Distribution of operate and release voltage 100 90 80 FTR-F1CL012R N=100 100 Distribution of contact resistance FTR-F1CL012R N=100 Make Break Service life (x10 operations) 50 FTR-CL( )R Operate Release 80 Distribution (%) 20 10 5 AC250V COS o=0.7 DC24V =7ms 60 50 40 30 20 Distribution (%) 0 10 20 30 40 50 60 70 80 AC250V / DC24 V resistive 70 60 4 40 2 1 20 AC250V Cos=0.4 DC24V =15ms 0 1 10 5 6 7 8 9 10 0 0 0 2 4 6 8 10 12 14 Contact load current (A) 2 3 4 Nominal voltage multiplying factor (%) Contact resistance (m) 4 FTR-F1 SERIES n DIMENSIONS l Dimensions FTR-F1A type 29.0+0.3 12.8+0.3 l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) 6-o1.3 1 NO 16.5+0.3 2 COM 4 NO 8 COM 7 0.4 5 5.0 20.0 (2.1) 0.4 5.0 0.4 20.0 3.3 0.9 (2.1) (2.65) 0.3 7.5 1.0 FTR-F1C type 29.0+0.3 12.8+0.3 1 2 3 NO COM NC 16.5+0.3 4 NO COM NC 8 7 6 3.3 0.3 (2.65) 7.5 1.0 0.4 5 5.0 5.0 20.0 (2.1) 0.4 0.4 0.4 5.0 5.0 20.0 0.9 (2.1) 7.5 (2.65) 6-o1.3 7.5 (2.65) Unit: mm 5 FTR-F1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 6 FTR-F1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 29, 2008 7 |
Price & Availability of FTR-F1CL012RRG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |